Merk | MyWall |
---|---|
Fabrikant | transmedia Kabelverbindungen GmbH |
Model | H16-1WL |
Modeljaar | 2012 |
Onderdeelnummer | 4012386131120 |
Meegeleverde onderdelen | Wandhouder |
Aantal items | 1 |
Beeldverhouding | 0.67291666667 |
Batterijen inbegrepen | Nee |
Batterijen vereist | Nee |
Refresh rate | 60 Hz |
Materiaalsoort | Metaal |
Fabrikant | transmedia Kabelverbindungen GmbH |
Modelnummer item | H16-1WL |
Productafmetingen | 29.4 x 20 x 9.2 cm; 1.6 kg |
ASIN | B003FA4P8K |
Gegarandeerde software-updates tot | unknown |
Andere verkopers op Amazon
& GRATIS bezorging
& GRATIS bezorging
60% positief
Aan winkelwagen toevoegen ...
Toegevoegd aan de winkelwagen
Niet toegevoegd
Artikel is toegevoegd aan uw winkelwagen
Niet toegevoegd
Afbeelding niet beschikbaar
kleur:
-
-
-
- Om deze video te bekijken, download Flash Player
-
-
-
-
-
VideoVIDEO
-
-
myWall H16-1WL Plafondbeugel Beamer, Belastbaarheid 15 Kg, Plafondafstand 225 mm, Wit
Je aankoop verbeteren
Merk | MyWall |
Afmetingen van item (L x B x H) | 29.4 x 20 x 9.2 centimeter |
Materiaal | Metaal |
Kleur | Wit |
Armlengte | 22.5 Centimeter |
Gewicht van item | 1.6 Kilogram |
Over dit item
- myWall universele plafondhouder voor beamers met cardangewricht (gatafstand individueel instelbaar) in kleur wit
- Gatafstand individueel instelbaar (maximale diameter gat: 31 cm)/plafondafstand: 225 mm
- Zijdelings draaibaar: 360° / instelbare helling door cardangewricht: 180°
- Gemaakt van stevig geanodiseerd aluminium gegoten aluminium, draagt tot 15 kg / geïntegreerde kabelgeleiding
- Inhoud: MyWall plafondhouder voor beamer met cardangewricht incl. handleiding en bevestigingsmateriaal
Klanten die dit item hebben bekeken, bekeken ook
Productgegevens
Technische gegevens
Extra informatie
Batterijen: | 1 Onbekende batterij(en) vereist. |
---|---|
Datum eerste beschikbaarheid | 15 januari 2020 |
Klantenrecensies |
4,5 van 5 sterren |
Plaats in bestsellerlijst | #37,556 in Elektronica (Top 100 in bekijkenElektronica) #25 in Beamerhouders |
Is Discontinued By Manufacturer | Nee |
Garantie en ondersteuning
Productbeschrijving fabrikant
|
|
|
---|---|---|
Vrije beweging met kruiskoppelingMet het vrij beweegbare cardangewricht kan de beamer heel eenvoudig in de gewenste positie worden verplaatst. Je ontvangt altijd een 100% geprojecteerd beeld dat je hebt ingesteld. |
Veilige grip voor je beamerHoogwaardige afwerking en een sterk materiaal garanderen een stevige grip op het plafond. Alle benodigde schroeven en een gemakkelijk te begrijpen handleiding zijn natuurlijk ook inbegrepen. |
Geschikt voor bijna elke beamerHet hoge draagvermogen van 15 kg en de plafondafstand van 225 mm bieden veel ruimte voor de bijpassende beamer. Ook de gatafstanden zijn universeel instelbaar. |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|
H 16-1 CL | H 16-1 SL | H 16-1 L | H 16-1 WL | H 16-1 AL | |
Kleur: | chroom | zwart | zilver | wit | antraciet |
belastbaarheid: | 15 kg | 15 kg | 15 kg | 15 kg | 15 kg |
Plafond afstand | 225 mm | 225 mm | 225 mm | 225 mm | 225 mm |
Gatafstanden universeel instelbaar | ✓ | ✓ | ✓ | ✓ | ✓ |
Instelbare helling door kruiskoppeling | 180° | 180° | 180° | 180° | 180° |
Zijdelings draaibaar | 360° | 360° | 360° | 360° | 360° |
Klantenrecensies
Klantenrecensies, inclusief sterbeoordelingen voor producten, geven klanten meer informatie over het product en helpen bij de beslissing of dit het juiste product voor hen is.
Om de algehele sterbeoordeling en procentuele uitsplitsing per ster te berekenen, gebruiken we niet een gewoon gemiddelde. Maar ons systeem houdt rekening met zaken als hoe recent een recensie is en of de beoordelaar het item op Amazon heeft gekocht. Het systeem heeft ook recensies geanalyseerd om de betrouwbaarheid te verifiëren.
Meer informatie over hoe klantenrecensies op Amazon werkenBeste recensies uit Nederland
Er is een probleem opgetreden tijdens het filteren van de recensies. Probeer het later opnieuw.
Beste recensies uit andere landen

The mount came well packaged. It came with a generous selection of machine screws for attaching to differing projectors, each size individually wrapped and clearly labelled. The instructions explain clearly how to assemble the mount and how to affix to wall at 90 degrees, or to the ceiling.
My projector has 3 mount holes which this H16-1WL managed to accommodate using trial and error with the many options of arm and screw positions that the mount and arms allow. I wanted to mount the projector to my back wall (to give me extra projection distance as I had to avoid an old chimney ceiling cavity). The mount would have been at 90 degrees at the hinges, which it can comfortably do. I failed sadly as my projector mount holes are at the front of the projector which didn't allow enough distance from the hinges to the mount plate to pass far enough past the projector. No problem for a smaller projector, or for a projector with mounting holes more centralised or towards the rear.
Instead I ceiling mounted. Happily, nay, amazingly there was a beam exactly where I needed it. I offered the mount plate to the ceiling and marked the 2 screw holes. Two strong screws, washers and wall plugs are included with the mount plate which I trust are more than fit for purpose.
Positioning and tweaking are hinged and tightened using allen key bolts (keys supplied). This allows for forward and backward rotation as well as left to right.
I do have one small niggle with this mount however, the 360 swivel locking nut. The mount is in 4 pieces, the ceiling plate (1), spacer tube (2) which screws into the mount, top tilt hinge (3) and lastly bottom tilt hinge and projector mount (4) (numbers are indicated on one of my pictures). The top tilt hinge inserts into the spacer tube and is locked in place using an allen key grommet screw (5) that wedges it tight. Whilst this is suffice, sadly, when tightening it does have the habit of moving the hinge shaft slightly, maybe a fraction of a millimetre, which can be over an inch or more of movement on the projected image surface over 2 meters away. Please note however, this is a small niggle - and just needs a firm grip and patience. I correctly aligned within 2 minutes of passive, patient, manhandling.
My local electrical shop quoted me £50 for a mount, this is absolutely more than adequate. I was impressed with the vast array of screws and tools included and the clear instructions, a delight at this price point. I believe it looks clean and professional and was easy to fit together and adjust.
There are holes on one side of the connecting tube, again, pictured, that aren't in the manufactures pictures. I case that's of importance to you.
In summary, a great bit of kit.


Beoordeeld in het Verenigd Koninkrijk op 16 november 2017
The mount came well packaged. It came with a generous selection of machine screws for attaching to differing projectors, each size individually wrapped and clearly labelled. The instructions explain clearly how to assemble the mount and how to affix to wall at 90 degrees, or to the ceiling.
My projector has 3 mount holes which this H16-1WL managed to accommodate using trial and error with the many options of arm and screw positions that the mount and arms allow. I wanted to mount the projector to my back wall (to give me extra projection distance as I had to avoid an old chimney ceiling cavity). The mount would have been at 90 degrees at the hinges, which it can comfortably do. I failed sadly as my projector mount holes are at the front of the projector which didn't allow enough distance from the hinges to the mount plate to pass far enough past the projector. No problem for a smaller projector, or for a projector with mounting holes more centralised or towards the rear.
Instead I ceiling mounted. Happily, nay, amazingly there was a beam exactly where I needed it. I offered the mount plate to the ceiling and marked the 2 screw holes. Two strong screws, washers and wall plugs are included with the mount plate which I trust are more than fit for purpose.
Positioning and tweaking are hinged and tightened using allen key bolts (keys supplied). This allows for forward and backward rotation as well as left to right.
I do have one small niggle with this mount however, the 360 swivel locking nut. The mount is in 4 pieces, the ceiling plate (1), spacer tube (2) which screws into the mount, top tilt hinge (3) and lastly bottom tilt hinge and projector mount (4) (numbers are indicated on one of my pictures). The top tilt hinge inserts into the spacer tube and is locked in place using an allen key grommet screw (5) that wedges it tight. Whilst this is suffice, sadly, when tightening it does have the habit of moving the hinge shaft slightly, maybe a fraction of a millimetre, which can be over an inch or more of movement on the projected image surface over 2 meters away. Please note however, this is a small niggle - and just needs a firm grip and patience. I correctly aligned within 2 minutes of passive, patient, manhandling.
My local electrical shop quoted me £50 for a mount, this is absolutely more than adequate. I was impressed with the vast array of screws and tools included and the clear instructions, a delight at this price point. I believe it looks clean and professional and was easy to fit together and adjust.
There are holes on one side of the connecting tube, again, pictured, that aren't in the manufactures pictures. I case that's of importance to you.
In summary, a great bit of kit.








Beoordeeld in het Verenigd Koninkrijk op 7 maart 2017


There is another small problem that buyers should be aware of. The otherwise excellent and clear instructions do miss out any mention of fitting one particular bolt that holds the bracket together. Someone else's review suggests this is a serious safety issue. My feeling is that anyone who manages to get this installed without the bolt and only the small grub screw in place has probably managed the impossible while simultaneously proving the old adage 'never underestimate the stupidity of folk...'

Well made and cheap,certainly strong enough for my projector weight.
Easy to assemble everything is included just requiring drill and pozi driver.
Plenty of adjustment so no problems aligning up.
I ended up corner wall mounting my projector as still within the 30deg spec tolerant,which made the dreaded cable run nice and tidy (trunking still to fit in photo)
I'm very happy can fully recommend this product.


Beoordeeld in het Verenigd Koninkrijk op 13 mei 2017
Well made and cheap,certainly strong enough for my projector weight.
Easy to assemble everything is included just requiring drill and pozi driver.
Plenty of adjustment so no problems aligning up.
I ended up corner wall mounting my projector as still within the 30deg spec tolerant,which made the dreaded cable run nice and tidy (trunking still to fit in photo)
I'm very happy can fully recommend this product.





Not to take away from the above, but I wanted to make two minor points for product improvement (just in case the designers ever look at this...) 1: my projector needed M5 bolts to attach - including these as well as M4 and M6 would be super helpful. 2: The cylinder and the hook could probably be made as a single part - reducing manufacturing cost and removing the 'weak link' from the connections.
Thanks for reading.