Merk | Sabrent |
---|---|
Fabrikant | Sabrent |
Productafmetingen | 11.66 x 3.15 x 1.27 cm; 59 gram |
Modelnummer item | EC-SNVE |
Kleur | Zwart |
Batterijen wel of niet meegeleverd | Nee |
Fabrikant | Sabrent |
ASIN | B08RVC6F9Y |
Gegarandeerde software-updates tot | unknown |
Andere verkopers op Amazon
100% positief in de afgelopen 12 maanden
Aan winkelwagen toevoegen ...
Toegevoegd aan de winkelwagen
Niet toegevoegd
Artikel is toegevoegd aan uw winkelwagen
Niet toegevoegd
Afbeelding niet beschikbaar
kleur:
-
-
-
- Om deze video te bekijken, download Flash Player
Sabrent USB 3.2 Type-C gereedschapsvrije behuizing voor M.2 PCIe NVMe en SATA SSD's (EC-SNVE)
Je aankoop verbeteren
- GEMAK: 100% gereedschapsvrij, snel installeren en verwijderen SSD's zonder gereedschap.
- ONTWERP: Ultra-slanke aluminium behuizing met ABS frame. Slank, duurzaam en handig. Draagbaar en toch duurzaam, ideaal voor op reis.
- Compatibiliteit: M.2 vormfactor compatibel met zowel SATA als NVME in maten: 2242/2260/2280.
- SPEED: USB 3.2 ondersteunt gegevensoverdrachtssnelheden tot 10 Gbps voor stabiele en efficiënte gegevensoverdracht. Achterwaarts compatibel met USB 3.1 en USB 3.0 bij respectievelijke snelheidslimieten.
- PLUG & PLAY: Geen extra stuurprogramma's nodig. Bus aangedreven. Heeft geen externe voeding nodig. Perfect voor tech nerds, 4K content ontwerpers en ingenieurs. Met maximaal 1000MB/s wordt gegevenskopie en overdracht in een mum van tijd gedaan.
Koop het met
- +
- +
Klanten die dit item hebben bekeken, bekeken ook
Heb je een vraag?
Zoek naar een antwoord in productgegevens, veelgestelde vragen en recensies
Je vraag kan worden beantwoord door verkopers, fabrikanten of klanten die dit product hebben gekocht.
Controleer of u een geldige vraag hebt ingevoerd. U kunt uw vraag of bericht nog steeds bewerken.
Voer een vraag in.
Productgegevens
Technische gegevens
Extra informatie
Klantenrecensies |
4,5 van 5 sterren |
---|---|
Plaats in bestsellerlijst | #528 in Elektronica (Top 100 in bekijkenElektronica) #1 in Caddies |
Datum eerste beschikbaarheid | 11 januari 2021 |
Garantie en ondersteuning
Productbeschrijving fabrikant

Beschrijving van het product
De Sabrent USB 3.2 Tool-Free Enclosure voor M.2 PCIe NVMe en SATA SSD's is de perfecte oplossing voor uw behuizing behoeften!
SYSTEEM EISEN:
Windows 7 of hogerMac OS 10.5 of hogerLinux.
SATA & NVME Compatibiliteit:
Alleen compatibel met M Key en B+M connectoren Niet compatibel met B Key Connectors.M.2 form factor compatibel met zowel SATA als NVME in maten: 2242/2260/2280.
INHOUD VAN DE PAKKE
- USB Tool-free behuizing.
- 8" Type-C naar Type-C kabel.
- Gebruikershandleiding.
|
|
|
---|---|---|
Tool Free Design:GEMAK: 100% Tool-Free, snel SSD's installeren en verwijderen zonder gereedschap. ONTWERP: Ultra-slanke aluminium behuizing met ABS frame. Slank, Duurzaam en handig. Draagbaar en toch duurzaam, ideaal voor reizen. |
PLUG & PLAY:Ultra-snelle 10Gbps doorvoer, lage latentie en energie-efficiëntie. Perfect voor tech nerds, 4K content ontwerpers en ingenieurs. Met maximaal 1000MB/s wordt het kopiëren en overbrengen van gegevens in een mum van tijd gedaan. |
Bliksem Snelle Snelheid:SNELHEID: USB 3.2 ondersteunt datatransmissiesnelheden tot 10 Gbps voor een stabiele en efficiënte gegevensoverdracht. Achterwaarts compatibel met USB 3.1 en USB 3.0 met respectieve snelheidslimieten. |
Klantenrecensies
Klantenrecensies, inclusief sterbeoordelingen voor producten, geven klanten meer informatie over het product en helpen bij de beslissing of dit het juiste product voor hen is.
Om de algehele sterbeoordeling en procentuele uitsplitsing per ster te berekenen, gebruiken we niet een gewoon gemiddelde. Maar ons systeem houdt rekening met zaken als hoe recent een recensie is en of de beoordelaar het item op Amazon heeft gekocht. Het systeem heeft ook recensies geanalyseerd om de betrouwbaarheid te verifiëren.
Meer informatie over hoe klantenrecensies op Amazon werken
Beoordeeld in Nederland op 26 juli 2021
Beste recensies uit Nederland
Er is een probleem opgetreden tijdens het filteren van de recensies. Probeer het later opnieuw.
My new Macbook recognized the drive and two partitions, but would randomly go through cycles of ejecting and connecting the drive after a few seconds. It drove me crazy and I couldn't find much info on the issue online, so I decided to backup my data and reformat the drive to a full APFS partition. That did the trick and my SSD and drive are running very stable and fast right now. Hope this helps any other people running into this issue!
Great and cheap way to add some extra storage to your M1 based laptop.

Beoordeeld in Nederland op 26 juli 2021
My new Macbook recognized the drive and two partitions, but would randomly go through cycles of ejecting and connecting the drive after a few seconds. It drove me crazy and I couldn't find much info on the issue online, so I decided to backup my data and reformat the drive to a full APFS partition. That did the trick and my SSD and drive are running very stable and fast right now. Hope this helps any other people running into this issue!
Great and cheap way to add some extra storage to your M1 based laptop.

Makkelijk in gebruik; Open maken, M2 erin, vast zetten, dichtklappen en aansluiten maar.
Behaald met gemak de snelheden. Zit stevig in de behuizing en dus vertrouwd meenemen.

Beoordeeld in Nederland op 1 december 2021



Beoordeeld in Nederland op 4 december 2021

Beste recensies uit andere landen

Please note that unless you're using a USB-C 3.2 Gen 2 (10Gbps) port, you will not experience the full 1000MBps read/write speeds. Not all laptops have these newer ports and not all USB-C ports are alike.
The enclosure still works perfectly with the USB-C 3.2 Gen 1 (5 Gbps) port but your speeds will be limited to round about 460MBps read/write. I installed a reasonably priced WD SN550 1TB M.2 NVMe SSD and the performance is in line with my expectations. The enclosure runs cool and performance great.
Highly recommended, several times faster than traditional magnetic drives and a lot more reliable/rugged 👌🏻


Beoordeeld in het Verenigd Koninkrijk op 7 maart 2021
Please note that unless you're using a USB-C 3.2 Gen 2 (10Gbps) port, you will not experience the full 1000MBps read/write speeds. Not all laptops have these newer ports and not all USB-C ports are alike.
The enclosure still works perfectly with the USB-C 3.2 Gen 1 (5 Gbps) port but your speeds will be limited to round about 460MBps read/write. I installed a reasonably priced WD SN550 1TB M.2 NVMe SSD and the performance is in line with my expectations. The enclosure runs cool and performance great.
Highly recommended, several times faster than traditional magnetic drives and a lot more reliable/rugged 👌🏻





Zuerst das Positive (Produkt gefällt an sich sehr gut und würde bei Funktion 5 Sterne geben):
Schraubenlose Montage mit dem Kippmechanismus usw... alles super. Warum nur zwei Sterne?
Wie hier auch schon andere schrieben, gibt es Probleme... wie von Beemer schon beschrieben:
Das Gehäuse verliert von Zeit zu Zeit seine Verbindung und es muss aus der USB-Buchse gezogen und wieder angeschlossen werden. Es hat wohl auch andere USB-C Kabel versucht und auch an einem anderen Rechner. Bei mir kam dazu, das ich das Laufwerk in der Datenträgerverwaltung zwar sehen konnte und auch intialisieren ging, aber der letzte Schritt, das Formatieren ging einfach nicht - egal was ich gemacht habe (z.B. im Bios USB-C Speed von Auto auf Gen1 und Gen2 gestellt etc..).
Ich habe hier ein USB-C auf UAB-A Kabel von meinen Samsung Buds+ und das mal probiert und siehe da,
es läuft... ich kann es formatieren, keine Disconnects etc... allerdings nur mit 40MB pro Sekunde ^^ siehe Screenshot.
Ok ich vermute das dieses Samsung-Ladekabel nur zum Laden gedacht ist und nicht für Übetragungen bis 10 Gbit - habe nun bei Amazon ein USB-C auf USB-A Kabel bestellt. Also so wie das was hier mitgeliefert wird, nur an einem Ende einfach USB-A anstatt auch USB-C.
Wenn es damit mit 10 Gbit funktioniert, gebe ich hier bescheid und werde Sabrent anshreiben und um Erstattung für das ausgegeben Geld für ein Kabel bitten. Wenn nicht geht das ganze einfach komplett wieder Retoure.
Aktuell vermute ich, liegt es an sehr sicher an Sabrent - entweder der Controllerchip im Sabrentgehäuse oder nur am Kabel - keine Ahnung. Fakt ist, mit dem Anschluss über USB 3.2 Gen 1 (mit dem anderem Kabel) gibt es zumindest keine Probleme mehr bezüglich Formatierung oder Disconnects. Ob es dann wirklich in vollem Umfang funktioniert, wird mir erst das 10 Gbit USB-C auf USB-A Kabel zeigen wenn es bei mir ankommt.
Es lässt zumindest hoffen... ich berichte.
Was ich ebenfalls nicht gut finde ist, das kein 10Gbit USB-C auf USB-A Kabel mit beigelegt wird.
Andere Hersteller legen BEIDE Kabel bei! Und ich müsste jetzt nicht eins dazukaufen.
Außerdem gibt es sicher noch User ohne USB-C am Rechner.
Update 08.06.:
Das 10Gbit USB-C auf USB-A Kabel ist angekommen, dieses hier:
https://www.amazon.de/gp/product/B07D7PM3S4/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Habe es zuerst erneut am USB 3.2 Gen 1 Port probiert, wo ich nun die zu erwartenden Übertragungsgeschwindigkeiten um die 400 MB erhalte was schonmal sehr gut aussieht - ich habe nochmal Screenshots gemacht, auch vom gekauften Kabel.
Dann am USB 3.2 Gen 2 und siehe da, funktioniert mit voller Übertragungsgeschwindigkeit von etwa 900 bis 1000 MB wie es von Anfang an hätte sein sollen.
Die Frage ist, was unternimmt man jetzt? Das Produkt hat offensichtlich Mängel.
Was genau die Ursache ist, kann ich nicht sagen, sieht aber danach aus, dass das mitgelieferte Kabel USB-C zu USB-C nicht das richtige, also falsche Kabel ist und die Probleme verursacht. Da ich ja nicht der einzige mit dem Problem bin, glaube ich nicht, ein zufällig defektes Kabel erwischt zu haben. Was sicher ist, mit dem von mir bestellten Kabel funktioniert alles wie es soll. Somit liegt auch kein Defekt am Gehäuse oder an der M.2 vor.
Klar hätte auch noch ein 10Gbit USB-C zu USB-C Kabel kaufen können um es am USB-C Port zu testen, aber irgendwo reichts dann auch.
Nun hab ich abgesehen vom Ärger, zusätzlich 7€ investieren müssen. Mal sehen was Amazon bzw. der Händler dazu sagt. Die Bewertung bleibt vorerst bei gutmütigen zwei Sternen, da ich nicht weiß wie das jezt endet.
Ich berichte.


Beoordeeld in Duitsland op 5 juni 2021
Zuerst das Positive (Produkt gefällt an sich sehr gut und würde bei Funktion 5 Sterne geben):
Schraubenlose Montage mit dem Kippmechanismus usw... alles super. Warum nur zwei Sterne?
Wie hier auch schon andere schrieben, gibt es Probleme... wie von Beemer schon beschrieben:
Das Gehäuse verliert von Zeit zu Zeit seine Verbindung und es muss aus der USB-Buchse gezogen und wieder angeschlossen werden. Es hat wohl auch andere USB-C Kabel versucht und auch an einem anderen Rechner. Bei mir kam dazu, das ich das Laufwerk in der Datenträgerverwaltung zwar sehen konnte und auch intialisieren ging, aber der letzte Schritt, das Formatieren ging einfach nicht - egal was ich gemacht habe (z.B. im Bios USB-C Speed von Auto auf Gen1 und Gen2 gestellt etc..).
Ich habe hier ein USB-C auf UAB-A Kabel von meinen Samsung Buds+ und das mal probiert und siehe da,
es läuft... ich kann es formatieren, keine Disconnects etc... allerdings nur mit 40MB pro Sekunde ^^ siehe Screenshot.
Ok ich vermute das dieses Samsung-Ladekabel nur zum Laden gedacht ist und nicht für Übetragungen bis 10 Gbit - habe nun bei Amazon ein USB-C auf USB-A Kabel bestellt. Also so wie das was hier mitgeliefert wird, nur an einem Ende einfach USB-A anstatt auch USB-C.
Wenn es damit mit 10 Gbit funktioniert, gebe ich hier bescheid und werde Sabrent anshreiben und um Erstattung für das ausgegeben Geld für ein Kabel bitten. Wenn nicht geht das ganze einfach komplett wieder Retoure.
Aktuell vermute ich, liegt es an sehr sicher an Sabrent - entweder der Controllerchip im Sabrentgehäuse oder nur am Kabel - keine Ahnung. Fakt ist, mit dem Anschluss über USB 3.2 Gen 1 (mit dem anderem Kabel) gibt es zumindest keine Probleme mehr bezüglich Formatierung oder Disconnects. Ob es dann wirklich in vollem Umfang funktioniert, wird mir erst das 10 Gbit USB-C auf USB-A Kabel zeigen wenn es bei mir ankommt.
Es lässt zumindest hoffen... ich berichte.
Was ich ebenfalls nicht gut finde ist, das kein 10Gbit USB-C auf USB-A Kabel mit beigelegt wird.
Andere Hersteller legen BEIDE Kabel bei! Und ich müsste jetzt nicht eins dazukaufen.
Außerdem gibt es sicher noch User ohne USB-C am Rechner.
Update 08.06.:
Das 10Gbit USB-C auf USB-A Kabel ist angekommen, dieses hier:
https://www.amazon.de/gp/product/B07D7PM3S4/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Habe es zuerst erneut am USB 3.2 Gen 1 Port probiert, wo ich nun die zu erwartenden Übertragungsgeschwindigkeiten um die 400 MB erhalte was schonmal sehr gut aussieht - ich habe nochmal Screenshots gemacht, auch vom gekauften Kabel.
Dann am USB 3.2 Gen 2 und siehe da, funktioniert mit voller Übertragungsgeschwindigkeit von etwa 900 bis 1000 MB wie es von Anfang an hätte sein sollen.
Die Frage ist, was unternimmt man jetzt? Das Produkt hat offensichtlich Mängel.
Was genau die Ursache ist, kann ich nicht sagen, sieht aber danach aus, dass das mitgelieferte Kabel USB-C zu USB-C nicht das richtige, also falsche Kabel ist und die Probleme verursacht. Da ich ja nicht der einzige mit dem Problem bin, glaube ich nicht, ein zufällig defektes Kabel erwischt zu haben. Was sicher ist, mit dem von mir bestellten Kabel funktioniert alles wie es soll. Somit liegt auch kein Defekt am Gehäuse oder an der M.2 vor.
Klar hätte auch noch ein 10Gbit USB-C zu USB-C Kabel kaufen können um es am USB-C Port zu testen, aber irgendwo reichts dann auch.
Nun hab ich abgesehen vom Ärger, zusätzlich 7€ investieren müssen. Mal sehen was Amazon bzw. der Händler dazu sagt. Die Bewertung bleibt vorerst bei gutmütigen zwei Sternen, da ich nicht weiß wie das jezt endet.
Ich berichte.





Just a heads up though that I bought this so I could update FW on my drive and enable "game mode". But this device hides the physical aspect of the drive behind Sabrent firmware so your WD dashboard won't find it.
In the end I was able to achieve my aims as follows so in that respect I've increased my review score to reflect the job completed, bit it wasn't as straightforward as it should have been.
Repeating steps here hoping to help other buyers:
0) WD Dashboard software cannot see the drive. Established that WD SN850 drive visible to Windows and can be formatted so caddy is physically working.
Read up some more and find others with same issue on this and most other caddies.
1) Opened laptop (check I have m2 NVmE compatible laptop)
2) marvelled at the swollen battery in my laptop. Count myself lucky for finding it.
3) took NVmE drive out of laptop and put new WD SN850 drive into laptop slot
4) put laptop drive into this SABRENT caddy
5) set BIOS on laptop to unsecure boot mode, select SABRENT as boot device
6) booted to external device... Laptop won't boot...goes back to BIOS
7a - e) cursed for about 5 hours while I tried various things to get my laptop drive in the caddy to work. It refused..booting back into BIOS and alternating between that and then offering to do windows diagnostics/safe mode. Diagnostics didnt work. Lots of different permutations of insecure, CMS, secure, etc. but still refusing to boot from drive in the external SABRENT caddy.
8) in the end went into windows "safe mode with networking support"
9) cheered when WD Dashboard opened and found device
10) cursed some more when WD Dashboard wouldn't find updated FW..no network
11) I found I needed a hardwired Networking cable because WiFi disabled in safe mode (networking support in safe mode doesn't extend to WiFi)
12) remembered I had usb dongle with CAT5 network connection.
13) connected...updated FW on the now internal WD drive, se to GAME mode. Celebrate Win with a cup of tea
14) shutdown and switch original laptop drive back again
15) install new drive in PS5. Done

Installing a drive is OK. It is a toolless process as there are no screws. A button opens the case but it doesn't feel like it might spring open on it's own, and the drive is held in place by a small rubber grommet. This can be a little fiddly to do, and it might feel as if you're going to snap it off. Not a worry with the usual brass nubbin and screw that you normally see with nvme cases, so while OK, this is not a case I'd be happy swapping drives in and out of regularly. The rubber retainer will snap eventually, and then the whole thing is effectively useless with nothing to stop a drive sliding out of the edge connector.
The issue for me came with it's intended use as external storage for the PS5. This part isn't the fault of the unit; the PS5 is known to be fussy with cables and external boxes, and whatever controller is in this box is just one that the PS5 will not play nice with. Repeated dropoffs of connectivity, warnings of problems with the drive on every reboot. Slow and failed data transfers. I've now quit trying and moved to a cheaper one I bought a few months ago (https://www.amazon.co.uk/gp/product/B07TSBR114) and it's working much better. No random dropoffs or errors. Still doesn't like rest mode but few drives do.
Ultimately, very nice product, sturdy feeling. I really wanted to like it but it's lack of compatibility has made it pointless to keep.
Edit for PS5 owners:
The other external caddy I recommended above worked but was not perfect. Still the occasional complaint from the PS5. More recently I moved to using the Asus ROG Strix Arion external case. Definitely not cheap, and the size and LEDs are not to everyone's taste, but since then zero errors.

The Sabrent seemed to tick all boxes. It does NVMe and SATA, and it is a tool-free design. Many are, but require the two parts of an enclosure to slide together, and whilst this is usually not too tricky, once the heat transfer pad has expanded they are a pain to get apart. The Sabrent solves this with what seems to be a unique clamshell design.
The only snag is that on trying to use it I was getting 42MB/s throughput, both with DiskMark and the Windows built-in diagnostic app. The drive was a brand new Western Digital, and using the same drive, same cable, same port but with a competitor enclosure I got 300MB/s.
The vendor referred me to Sabrent support, who are quick off the mark and very helpful. I flashed it with new firmware and then carried out some commands the support chap asked me to do, and nothing changed. Actually, he asked me to run a test, then defrag and run the test again. On a SSD? You've got to be joking, and being a brand new blank drive it was pointless. Nevertheless, despite pointing that out several times and not getting a sensible reason for doing it, I did it anyway. Seriously, even on a spinning disk, defrag isn't going to see an order of magnitude better performance, and if it did on this I wouldn't waste the limited write life of my drive doing it regularly.
So, it's returned to Amazon. I would usually give it much less than 3 stars, but some people are happy with it (perhaps they have a different USB chipset) and it is quality kit, just slow quality kit.