Merk | MOSISO |
---|---|
Fabrikant | MOSISO |
Onderdeelnummer | NEW-EU-13PM-SGray |
Soort optisch station | Macbook Pro 13 Case A2159 A1989 A1706 A1708 |
Speciale kenmerken | Lichtgewicht |
Batterijen inbegrepen | Nee |
Batterijen vereist | Nee |
Materiaalsoort | Kunststof |
Heeft automatische scherpstelling | Nee |
Programmeerbare knoppen | Nee |
Fabrikant | MOSISO |
Fabrikantreferentie | NEW-EU-13PM-SGray |
Afmetingen pakket | 31 x 21 x 1.5 cm; 229.91 gram |
ASIN | B07S8P59B8 |
Gegarandeerde software-updates tot | unknown |
Aan winkelwagen toevoegen ...
Toegevoegd aan de winkelwagen
Niet toegevoegd
Artikel is toegevoegd aan uw winkelwagen
Niet toegevoegd
Afbeelding niet beschikbaar
kleur:
-
-
-
- Om deze video te bekijken, download Flash Player
MOSISO MacBook Pro 13 inch Hardcases 2019 2018 2017 2016 Release A2159 A1989 A1706 A1708, Kunststof Hardshell Cover Compatibel met MacBook Pro 13 met/zonder Touch Bar en Touch ID, Space Grey
Je aankoop verbeteren
Merk | MOSISO |
Kleur | Space Grey |
Speciale kenmerken | Lichtgewicht |
Materiaal | Kunststof |
Gewicht van item | 8.11 Ons |
Over dit item
- ALLEEN compatibel met 2016-2019 Release MacBook Pro 13 inch (modellen: A2159 A1989 A1706 met Touch Bar en A1708 zonder Touch Bar -- MUHN2LL/A, MUHQ2LL/A, MUHP2LL/A, MUHR2LL/A, MV962LL/A, MV992LL/A, MV972LL/A, MV9A2LL/A, MR9Q2LL/A, MR9R2LL/A, MPXV2LL/A, MPXX2LL/A, MPXW2LL/A, MPXY2LL/A, MPXQ2LL/A, MPXR2LL/A, MPXT2LL/A, MPXU2LL/A, MLL42LL/A, MLH12LL/A, MLVP2LL/A, MNQF2LL/A, MNQG2LL/A, MXK32LL/A, MXK62LL/A, MXK52LL/A, MXK72LL/A, MWP42LL/A, MWP72LL/A, MWP52LL/A, MWP82LL/A).
- Controleer alstublieft het modelnummer "Axxxx" op de achterkant van de MacBook voordat u het koopt, zorg ervoor dat u exact hetzelfde modelnummer kiest als de titel van de aanbieding "A2159" of "A1989" of "A1706" of "A1708". NO Knip het ontwerp, de transparantie is anders van kleur naar kleur.
- WAARSCHUWING: deze hoes is NIET compatibel met andere model MacBooks. Volledig geventileerd voor veilige warmteafgifte, volledige toegang tot alle knoppen en functies. Snap op het ontwerp, gemakkelijk op makkelijk uit. Sluit uw kabel of headset aan zonder de behuizing te verwijderen.
- Case Afmetingen: 12 x 8,5 x 0,6 inch / 30,5 x 21,6 x 1,52 cm, de Macbook Pro 13 Inch met / zonder Touch Bar en Touch ID Afmetingen: 11,97 x 8,36 x 0,59 inch / 30,4 x 21,2 x 1,49 cm.
- Snap op het ontwerp, gemakkelijk op makkelijk uit. MOSISO 1 jaar garantie op koffer.
Koop het met
- +
- +
Klanten die dit item hebben bekeken, bekeken ook
Heb je een vraag?
Zoek naar een antwoord in productgegevens, veelgestelde vragen en recensies
Je vraag kan worden beantwoord door verkopers, fabrikanten of klanten die dit product hebben gekocht.
Controleer of u een geldige vraag hebt ingevoerd. U kunt uw vraag of bericht nog steeds bewerken.
Voer een vraag in.
Productgegevens
Technische gegevens
Extra informatie
Datum eerste beschikbaarheid | 15 januari 2020 |
---|---|
Klantenrecensies |
4,0 van 5 sterren |
Plaats in bestsellerlijst | #126,328 in Elektronica (Top 100 in bekijkenElektronica) #575 in Harde koffer voor laptops |
Garantie en ondersteuning
Productbeschrijving

MOSISO Hard Shell Case met Screen Protector Series
ALLEEN ontworpen om compatibel te zijn met MacBook Pro 13 met/zonder Touch Bar modellen: A2159 & A1989 & A1706 & A1708, 2019 2018 2017 2016 Release). Controleer het modelnummer "Axxxx" onderaan de MacBook voordat u koopt, zorg ervoor dat u hetzelfde modelnummer kiest als de titel "A2159" of "A1989" of "A1706" of "A1708".
Compatibel met MacBook Pro 13" met USB-C poort
Modellen: A2159, A1989, A1706 - met Touch Bar, Touch ID & Retina-display
Model: A1708 - zonder Touch Bar
Release 2019 — MUHN2LL/A, MUHQ2LL/A, MUHP2LL/A, MUHR2LL/A, MV962LL/A, MV992LL/A, MV972LL/A, MV9A2LL/A;
Release 2018 — MR9Q2LL/A, MR9R2LL/A;
Release 2017 — MPXV2LL/A, MPXX2LL/A, MPXW2LL/A, MPXY2LL/A, MPXQ2LL/A, MPXR2LL/A, MPXT2LL/A, MPXU2LL/A;
Release 2016 — MLL42LL/A, MLUQ2LL/A, MLH12LL/A, MLVP2LL/A, MNQF2LL/A, MNQG2LL/A;

Functie en comfort
Prachtige afwerking plastic harde shell case beschermt uw MacBook tegen krassen en krassen. Ultra slanke lichtgewicht harde case heeft 9,8 oz in gewicht en 1,2 mm dik ontwerp voegt bijna geen gewicht toe aan uw apparaat.

Help snelle warmteafvoer
De MOSISO hoes is ontworpen met twee rijen bodemventilatie, waardoor een veilige warmteuitbetaling, waardoor uw MacBook koel blijft. Vier anti-slip siliconen voetjes houden uw MacBook stevig op zijn plaats.
Kenmerken van de zaak
|
|
|
---|---|---|
Niet gemakkelijk gebrokenDe MOSISO behuizing is gemaakt van stevig polycarbonaat materiaal, slank, lichtgewicht en naadloos, wat zeer flexibel en duurzaam is, niet esaily gebroken. |
Twee stukken OntwerpVolledige toegang tot alle knoppen en functies. Volledig verwijderbaar, eenvoudig aan en uit te trekken die uw MacBook kan beschermen tegen krassen en krassen. |
Beschikbare kleuren om uit te kiezenU kunt kiezen uit verschillende modieuze kleuren voor uw MacBook. 30+ verbazingwekkende kleuren beschikbaar. |
Klantenrecensies
Klantenrecensies, inclusief sterbeoordelingen voor producten, geven klanten meer informatie over het product en helpen bij de beslissing of dit het juiste product voor hen is.
Om de algehele sterbeoordeling en procentuele uitsplitsing per ster te berekenen, gebruiken we niet een gewoon gemiddelde. Maar ons systeem houdt rekening met zaken als hoe recent een recensie is en of de beoordelaar het item op Amazon heeft gekocht. Het systeem heeft ook recensies geanalyseerd om de betrouwbaarheid te verifiëren.
Meer informatie over hoe klantenrecensies op Amazon werken
Beste recensies uit Nederland
Er is een probleem opgetreden tijdens het filteren van de recensies. Probeer het later opnieuw.


Beste recensies uit andere landen

Unfortunately it hasn't stood up to the wear and tear of moving from the kitchen table to the front room.
The plastic seems to shatter really quickly, the top corner on the lid cracked int he first 10 days, and I duct taped it together to stop the corner from snapping off. No biggie for me, as this was bought for protection, not aesthetics. But then the bottom corner cracked, again not to much bother because it was still held on.
Then the stress fractures appeared on the little tabs on the bottom lid, where you rest your wrists, and one has finally cracked off and is really sharp and scraping and digging into my wrist, the other side is about to go too. So it's coming off and going in the bin.
PROS
• Good clear case
• Rubber feet are sturdy and will last longer than the case
• Vents on the bottom allow even heat loss
• Clear option allows for displaying the beauty of the macbook itself without obstructing any elements
CONS
• Plastic is brittle and cracks easily
• The fitting is tight, which appears to contribute to stress cracks
• Lasted less than 3 months for me with light use from kitchen to lounge
I wanted this case to last, but I'll be looking for something else now as the bottom tab has gone and separates when the laptop is picked up.


Beoordeeld in het Verenigd Koninkrijk op 13 december 2017
Unfortunately it hasn't stood up to the wear and tear of moving from the kitchen table to the front room.
The plastic seems to shatter really quickly, the top corner on the lid cracked int he first 10 days, and I duct taped it together to stop the corner from snapping off. No biggie for me, as this was bought for protection, not aesthetics. But then the bottom corner cracked, again not to much bother because it was still held on.
Then the stress fractures appeared on the little tabs on the bottom lid, where you rest your wrists, and one has finally cracked off and is really sharp and scraping and digging into my wrist, the other side is about to go too. So it's coming off and going in the bin.
PROS
• Good clear case
• Rubber feet are sturdy and will last longer than the case
• Vents on the bottom allow even heat loss
• Clear option allows for displaying the beauty of the macbook itself without obstructing any elements
CONS
• Plastic is brittle and cracks easily
• The fitting is tight, which appears to contribute to stress cracks
• Lasted less than 3 months for me with light use from kitchen to lounge
I wanted this case to last, but I'll be looking for something else now as the bottom tab has gone and separates when the laptop is picked up.




Acquistata per MacBook Pro 13 con touch bar (A1706) perché non voglio che il metallo si graffi.
Partiamo dalla confezione della cover: arriva in un sottilissimo cellophane marchiato MOSISO, la cover è poi avvolta da un secondo cellophane del tipo "aderente" per scongiurare al massimo la possibilità che la stessa possa graffiarsi durante il trasporto. Una volta aperta troviamo al suo interno le istruzioni per il fissaggio e un piccolo cartoncino pubblicitario della stessa MOSISO in cui vi sono rappresentate le (quasi) infinite variazioni di colore della cover stessa e solo alcune borse per il trasporto del portatile (anche queste di ottima fattura). Vi sono ancora quattro piedini di ricambio di colore bianco della 3M.
Il materiale con cui è composta risulta gradevole al tatto, opaco e dà la sensazione di essere un materiale di ottima qualità! Non ho trovato alcun tipo di sbavatura lungo il perimetro della cover ne differenze di colore. Il montaggio l'ho trovato estremamente semplice, consiglio di pulire con un panno la superficie del computer prima di applicarla. La parte inferiore ha due linguette quasi del tutto invisibili che agganciano la cover ai lati del trackpad nella parte anteriore, mentre nella parte posteriore si agganciano alle prese d'aria del portatile senza compromettere in alcun modo il suo sistema di raffreddamento.
Copre quasi totalmente il corpo del computer ad eccezione di una piccola parte negli angoli sul retro, ma questo è necessario in quanto il display all'apertura necessita di spazio che, se venisse occupato dalla cover, non consentirebbe appunto la sua apertura (ho allegato una foto del dettaglio per farvi comprendere al meglio).
La cover del display aderisce perfettamente lungo tutto il suo perimetro e non lascia scoperto alcun punto ne bolle d'aria al suo interno. Resta salda tramite quattro piccolissime e impercettibili linguette (come sopra) poste due lateralmente alla cornice superiore e due alla cornice inferiore.
Personalmente avrei messo una terza linguetta centrale alla cornice superiore per tener ben salda la cover al display nel momento dell'apertura in quanto il dito inserito nella scanalatura di apertura potrebbe agganciare la cover e non il display. Detto questo la sua apertura non risulta assolutamente compromessa.
Nella mia prima settimana di utilizzo ho trovato la cover fantastica. Durante la presa della macchina a volte si vedono delle impronte che però vanno via con un colpo di spugna. L'ingombro sul portatile stesso e minimo, quasi impercettibile e la sua trasparenza lascia intravedere il marchio di fabbrica dell'azienda del portatile.
Sebbene trasporto il portatile all'interno di una borsa acquistata sempre dalla stessa MOSISO e anch'essa recensita, trovo la cover molto utile anche durante gli spostamenti in quanto dà una ulteriore protezione nel contatto interno con la cerniera!
Mi sento assolutamente di consigliarne il suo acquisto se lo scopo è quello di proteggere il portatile senza compromettere il suo design. Se avete qualcosa da chiedere, fate pure!
Alberto
Aggiornamento dopo due anni di utilizzo: il materiale opaco, quello che li dal il colore al case, ha iniziato a spellarsi è in alcuni punti, soprattutto agli angoli, si è crepata. Mi è saltato anche uno dei ganci vicino al Trackpad che tiene fermo il case. Il MacBook comunque è stato protetto alla grande e la durata mi sembra buona! L’ho riacquistata e con mia grande sorpresa ho notato delle piccole modifiche relative ai ganci, ora sono più ampi e tengono decisamente più ferma la parte di case del display. Forse allora le recensioni servono.... 😅
Ottimo lavoro comunque!
P.S.: se ti è piaciuta questa recensione, sai cosa fare! 😀


Beoordeeld in Italië op 29 augustus 2017
Acquistata per MacBook Pro 13 con touch bar (A1706) perché non voglio che il metallo si graffi.
Partiamo dalla confezione della cover: arriva in un sottilissimo cellophane marchiato MOSISO, la cover è poi avvolta da un secondo cellophane del tipo "aderente" per scongiurare al massimo la possibilità che la stessa possa graffiarsi durante il trasporto. Una volta aperta troviamo al suo interno le istruzioni per il fissaggio e un piccolo cartoncino pubblicitario della stessa MOSISO in cui vi sono rappresentate le (quasi) infinite variazioni di colore della cover stessa e solo alcune borse per il trasporto del portatile (anche queste di ottima fattura). Vi sono ancora quattro piedini di ricambio di colore bianco della 3M.
Il materiale con cui è composta risulta gradevole al tatto, opaco e dà la sensazione di essere un materiale di ottima qualità! Non ho trovato alcun tipo di sbavatura lungo il perimetro della cover ne differenze di colore. Il montaggio l'ho trovato estremamente semplice, consiglio di pulire con un panno la superficie del computer prima di applicarla. La parte inferiore ha due linguette quasi del tutto invisibili che agganciano la cover ai lati del trackpad nella parte anteriore, mentre nella parte posteriore si agganciano alle prese d'aria del portatile senza compromettere in alcun modo il suo sistema di raffreddamento.
Copre quasi totalmente il corpo del computer ad eccezione di una piccola parte negli angoli sul retro, ma questo è necessario in quanto il display all'apertura necessita di spazio che, se venisse occupato dalla cover, non consentirebbe appunto la sua apertura (ho allegato una foto del dettaglio per farvi comprendere al meglio).
La cover del display aderisce perfettamente lungo tutto il suo perimetro e non lascia scoperto alcun punto ne bolle d'aria al suo interno. Resta salda tramite quattro piccolissime e impercettibili linguette (come sopra) poste due lateralmente alla cornice superiore e due alla cornice inferiore.
Personalmente avrei messo una terza linguetta centrale alla cornice superiore per tener ben salda la cover al display nel momento dell'apertura in quanto il dito inserito nella scanalatura di apertura potrebbe agganciare la cover e non il display. Detto questo la sua apertura non risulta assolutamente compromessa.
Nella mia prima settimana di utilizzo ho trovato la cover fantastica. Durante la presa della macchina a volte si vedono delle impronte che però vanno via con un colpo di spugna. L'ingombro sul portatile stesso e minimo, quasi impercettibile e la sua trasparenza lascia intravedere il marchio di fabbrica dell'azienda del portatile.
Sebbene trasporto il portatile all'interno di una borsa acquistata sempre dalla stessa MOSISO e anch'essa recensita, trovo la cover molto utile anche durante gli spostamenti in quanto dà una ulteriore protezione nel contatto interno con la cerniera!
Mi sento assolutamente di consigliarne il suo acquisto se lo scopo è quello di proteggere il portatile senza compromettere il suo design. Se avete qualcosa da chiedere, fate pure!
Alberto
Aggiornamento dopo due anni di utilizzo: il materiale opaco, quello che li dal il colore al case, ha iniziato a spellarsi è in alcuni punti, soprattutto agli angoli, si è crepata. Mi è saltato anche uno dei ganci vicino al Trackpad che tiene fermo il case. Il MacBook comunque è stato protetto alla grande e la durata mi sembra buona! L’ho riacquistata e con mia grande sorpresa ho notato delle piccole modifiche relative ai ganci, ora sono più ampi e tengono decisamente più ferma la parte di case del display. Forse allora le recensioni servono.... 😅
Ottimo lavoro comunque!
P.S.: se ti è piaciuta questa recensione, sai cosa fare! 😀





Even otherwise Its made out Of cheap plastic and wont last but does help keep laptop scratch free esp when traveling to airports and using on table like me.. also i order space grey or clear plastic im forgetting but its not super clear even though u can see a foggy apple logo its not top quality and hides the beauty of ur laptop.. but one thing it is is very sleek and good fit as the top fit actually was to snappy and tight and i was worried as i literaly had to tuck first under the screen and then on top maybe its the otherway round but i need to really push my screen in there and was scared it would break and now scared to take it off as its such a tight fit forget snug.. for the money and value its great but my one came scratch from the frond side and with a few manufactor marks on the top case... as showed in the pic.. anyways as for the bottle i had the same it kept comin off till i read a review and it explained same now how i have done it is to put the back botton bit as behind the butt of the laptop first and then click the top front ones near the trackpad.. and it ll clixk and fit rite into place and wont budge but it u think this cover can stand misuse than barely 1 trip and maybe back to heathrow airport for wat i feel.. and one last bit some ppl said it doesnt fully fit at the back and its short and all.. no its not its made tha way to keep the fans open which r behind at the back of the laptop for over heating same reason the grids on the back case for heat to escape and not have it too hot.. also the white buttons help an adition to save ur real machine.. product design and all that is pretty clever and fair and very sleek no doubt its just built quality plastic i guess i was expecting apple level. But definitely a must have and last question yes it fits the new macbook pro 13” like second skin im sure the 15 works aswell.. hope it helps..


Beoordeeld in het Verenigd Koninkrijk op 5 januari 2018
Even otherwise Its made out Of cheap plastic and wont last but does help keep laptop scratch free esp when traveling to airports and using on table like me.. also i order space grey or clear plastic im forgetting but its not super clear even though u can see a foggy apple logo its not top quality and hides the beauty of ur laptop.. but one thing it is is very sleek and good fit as the top fit actually was to snappy and tight and i was worried as i literaly had to tuck first under the screen and then on top maybe its the otherway round but i need to really push my screen in there and was scared it would break and now scared to take it off as its such a tight fit forget snug.. for the money and value its great but my one came scratch from the frond side and with a few manufactor marks on the top case... as showed in the pic.. anyways as for the bottle i had the same it kept comin off till i read a review and it explained same now how i have done it is to put the back botton bit as behind the butt of the laptop first and then click the top front ones near the trackpad.. and it ll clixk and fit rite into place and wont budge but it u think this cover can stand misuse than barely 1 trip and maybe back to heathrow airport for wat i feel.. and one last bit some ppl said it doesnt fully fit at the back and its short and all.. no its not its made tha way to keep the fans open which r behind at the back of the laptop for over heating same reason the grids on the back case for heat to escape and not have it too hot.. also the white buttons help an adition to save ur real machine.. product design and all that is pretty clever and fair and very sleek no doubt its just built quality plastic i guess i was expecting apple level. But definitely a must have and last question yes it fits the new macbook pro 13” like second skin im sure the 15 works aswell.. hope it helps..














The only downside is that impirchhased a USB-c port that fits flush to the side of my MacBook and it does not fit with the case on
This came packaged well but not as OTT as expected from Amazon. I am surprised it didn't arrive damaged.
It was all shrink wrapped and I used eco screen cleaner to wipe everything down before clipping the case on. It was simple and quick. You need to press quite firmly until you here it 'click' into place'
I'm more confident with my £1500 MacBook now it has some protection. The rear base corners are not protected as the case doesn't reach that far but I'm more than happy for the price.


Beoordeeld in het Verenigd Koninkrijk op 6 september 2017
The only downside is that impirchhased a USB-c port that fits flush to the side of my MacBook and it does not fit with the case on
This came packaged well but not as OTT as expected from Amazon. I am surprised it didn't arrive damaged.
It was all shrink wrapped and I used eco screen cleaner to wipe everything down before clipping the case on. It was simple and quick. You need to press quite firmly until you here it 'click' into place'
I'm more confident with my £1500 MacBook now it has some protection. The rear base corners are not protected as the case doesn't reach that far but I'm more than happy for the price.






Beoordeeld in het Verenigd Koninkrijk op 13 januari 2020



