Amazon.nl: Klantenrecensies: Fibaro Motionsensor, Bewegingsmelder Single met 4-voudige Sensor, FGMS-001-ZW5, Wit, 1 Stuk

Beoordeeld in Nederland op 18 mei 2021

Stijlnaam: Bewegingssensor.Geverifieerde aankoop

Januari deze Fibaro gekocht. Onlangs stopte hij er van het een op andere moment mee. Wat blijkt, Amazon is geen formele dealer en dus geen productgarantie. Amazon zelf behandelt alleen klachten binnen een maand na aankoop. Sowieso is via de site niets duidelijks te vinden.

Koop dus bij de dealer. Misschien paar euro meer maar wel service zoals het hoort.

2 mensen vonden dit nuttig

Nuttig

Dennis Wilmans

Goed product

Beoordeeld in Nederland op 20 januari 2021

Stijlnaam: Bewegingssensor.Geverifieerde aankoop

Veel mogelijkheden voor een klein balletje

Nuttig

Susi

MultiSensor Tecnología Z-Wave. Altas prestaciones

Beoordeeld in Spanje op 9 november 2017

Stijlnaam: Bewegingssensor.Geverifieerde aankoop

Soy amante de la domótica y en casa tengo varios productos de Fibra y de Aeotec, controlados a través de un NAS y un Usb con tecnología Z-Wave. No quería quedarme en el simple hecho de que se encendiesen y apagasen las luces usando un móvil, quería introducir algún tipo de sensor que detectara movimiento y actuase solo, decantándome por este de Fibaro.

Antes de nada deciros que existen 2 modelos de este mismo producto. Esta este que lleva tecnología Z-Wave y su hermano gemelo (son idénticos visualmente) que incluye tecnología Bluetooth para ser incluido en HomeKit (Apple) y demás sistemas de integración vía Bluetooth. Pero OJO aqui viene lo más importante, si su sistema domótico se basa en tecnología Z-Wave no debes comprar su hermano Bluetooth ya que no puede ser integrado en ningún sistema Z-Wave (Domoticz, Jeedom, Eedomus etc).

El ojo se desenrosca y dentro lleva la pila y el botón de inclusión. Este botón sirve para incluirlo en los distintos sistemas domésticos mencionados anteriormente. Cosa muy importante: cuando se modifica cualquier parámetro este solo se hace efectivo pasadas 5 horas, por lo que a veces puede parecer que no funciona. Si quieres que sea al instante has de apretar el botón de inclusión 1 vez corta y automáticamente actualiza los parámetros.

Dicho esto, que es bastante importante, se trata de un multisensor (movimiento, luz, temperatura y acelerómetro) de un tamaño muy pequeño, construido en unos materiales bastante buenos. Lleva una base movible para que una vez puesto en un sitio se pueda girar hacia arriba/abajo o izquierda/derecha (según lo pongas). Se puede poner a través de taco u tornillo a la pared o bien pegado con con cinta de doble cara

El frontal (con forma de ojo) cambia se pone de color, dependiendo de las configuraciones que le hayamos hecho (de fabrica viene azul 18,4 ºC , verde 21.5ºC y amarillo 27 ºC) aunque son totalmente modificables a gusto de cada uno. Entre temperatura y temperatura el color también varia, es decir si la temperatura esta a 20 ºC el color será un azul verdoso. Pero como os comento todos estos parámetros son modificables.

El sensor de temperatura va perfecto, para probar lo he puesto junto al termostato NEST y clavan ambos la temperatura.

El sensor de movimiento también funciona muy bien, pudiendo ajustar también la sensibilidad de detección. He de deciros que a partir de los 10 metros empieza a fallar. Según el fabricante son 50 metros en exterior y 40 metros en interior, dependiendo del terreno etc etc, pero esto no es cierto, más que nada porque lo he probado en un garaje que caben 2 coches y a veces falla cuando se abre la puerta del garaje, ya que no detecta movimiento.

No me voy a meter mucho en los usos que se le pueden dar, ya que esto va según imaginación y gustos de cada uno, pero yo los tengo puestos en un garaje para que se encienda la luz cuando entras en el y sigues dentro, en una buhardilla para lo mismo y otro para una persiana que se va abriendo y cerrando dependiendo de la luz que entra.

Lleva una pila-batería del tipo CR123A que según tengas los parámetros configurados puede llegar hasta los 2 años. Si le pones unos parámetros muy radicales en cuanto a detectar movimiento cada poco tiempo etc etc es posible que la batería te dure 2 meses.

Para mí tiene 2 fallos importantes uno sería que no lleva sensor de humedad (otros fabricantes si que incluyen este parámetro) y otro que no se puede dejar fuera exponiéndolo a la lluvia.

PROS:
+ Buenos materiales y precio.
+ Multisensor
+ Fácil configuración y multitud de ajustes.

CONTRAS:
- Falta sensor de humedad.
- No compatible con la lluvia.

-- ARTICULO RECOMENDABLE--

Si te ha gustado mi explicación no dudes en votar. Si tienes alguna duda, pregunta. No te quedes con ella.

423 mensen vonden dit nuttig

Vertaal recensie in het Nederlands

R MacGregor

Solid Z-Wave Plus multi-sensor

Beoordeeld in het Verenigd Koninkrijk op 14 april 2017

Stijlnaam: Bewegingssensor.Geverifieerde aankoop

As well as this, I've got one of the Aeotec multi-sensors. This is very slightly smaller, and because of the shape slightly less obvious, than the Aoetec sensor. The main downside is that it's only battery powered, and doesn't have the humidity sensor.

That said, this is proving a very reliable, effective, device. I'm using it with Home Assistant (via OpenZWave), and it works without issue. The configuration options are good, making it easy to adjust things like the temperature report to account for the fact that it's warmer at the ceiling, or change the thresholds for reports.

I've attached it so far with just the double sided pad, and that's holding fine.

If you're debating between this and the Aeotec one, then for me it comes down to a choice between a compact install (Fibaro), or more sensors and optionally mains powered (Aeotec).

19 mensen vonden dit nuttig

Vertaal recensie in het Nederlands

Sparky

Not a bad sensor - could be better though.

Beoordeeld in het Verenigd Koninkrijk op 4 januari 2018

Stijlnaam: Bewegingssensor.Geverifieerde aankoop

I have a reasonable number of SmartThings sensors, with this being my first Fibaro sensor added to the Samsung system.
Initial thoughts are that it's not a bad little sensor. While not the prettiest, it works and pairs easily with the SmartThings system. After use of it for a week, my views are:

+ Small and discreet (although Led lights up when it sees you which gives away the sensor's location)
+ Pairs quickly, works as expected
+ Multiple sensors in one package

Negatives (although not a deal breaker)
- LED flashes when one of the sensors activates, such as motion
- LUX updates are slow, so some experimentation is needed to find a good lux level where motion lights can activate.
- Motion sensing is slower than SmartThings own motion sensor. Takes approx 1 second, where as SmartThings operates almost instantly.

I mainly bought this sensor to add LUX/luminance sensing for my system, because using motion sensors that operate lights only when it's dark had to rely on timing or sunset/sunrise settings. These are OK, except they don't take into account for cloudy/dark days, and I frequently found the sunrise/sunset failed if a light came on before the sunset triggered, leaving the light on until the next sunset operation.

Adding this sensor to the system has allowed me to replace all the timing parts of my events, so lights are now all operating if the house/outside is dark, which is much better. It has taken some time to find a lux setting that I'm happy with, and moving the sensor around to determine dark settings doesn't work as the sensor seems to report LUX changes very slowly.

One of the other issues is with the tamper detection - it triggers quite often (which displays a series of red, white and blue led flashes), when for example, it's serious windy outside (where my sensor is). But as I am not doing anything with the tamper detection, it's okay. Just hoping this doesn't impact battery life.

Overall, this is a neat sensor, which is a little slow, but adds the main functionality missing from Samsung's own products for SmartThings - luminance detection!

11 mensen vonden dit nuttig

Vertaal recensie in het Nederlands

Nice Cuppatee

Neat little multi-senor

Beoordeeld in het Verenigd Koninkrijk op 15 augustus 2017

Stijlnaam: Bewegingssensor.Geverifieerde aankoop

Nice little sensor. I have three of these controlling lights and security in my house. My set-up is Domiticz on a Raspberry Pi and this connects easily and has good functionality. Not only does it sense motion, but also light levels and temperature. One of mine is set to turn on the lights if there is movement detected and the light level is below a certain point.

It is compact (around table tennis ball size) and discrete. Being battery operated, you can put them anywhere (e,g, mounted on it's bracket on the wall or sitting on a bookshelf). I find the batteries last around 6 months and they're cheap and easy to replace. It does flicker it's LED lights behind the round panel on the front when it senses movement. You can change those settings so the colours represent different things (e.g. the temperature or light level) or you can just switch the LED lights off if you find it annoying or have it set-up in a bedroom.

Overall it's a neat little LED with quite a lot of features/sensors. It is a little expensive though. The Philips Hue motion sensor is just over half this price (but not so easy to integrate in a smart home system).

4 mensen vonden dit nuttig

Vertaal recensie in het Nederlands

stuart

Very easy so set up, well designed and seems solid

Beoordeeld in het Verenigd Koninkrijk op 25 november 2016

Stijlnaam: Bewegingssensor.Geverifieerde aankoop

So I only got this tiny sensor yesterday but I am very happy with it. I am using it along side zwave.me usb stick and home-assistant on a RPI3 as my controller with open-zwave. This was my first z-wave device and set-up was very simple.

It is the size of a pingpong ball and comes with battery and clip-on holder that allows the detector to be pointed in any direction and can be used as a stand or attached to a wall or other surface with a single included screw.

The "eye" changes colour dependent on temperature and lights up when movement is detected. All the sensors are able to be fine tuned within the device firmware through ozwcp and movement and vibration report on both plain and security channels and seems each can hold is own adjustments.

This is the first FIbaro device I have used and based on this I am going to give some in wall switches a go.
I will update in 6 or months with info on how the battery is holding up.

UPDATE: I thought I would update on 2 issues. First is range as one user reported it very short, this will of course be reliant on both sides of the link but I have the sensor about 25 meters from the closest relay point and through three walls, two standard brick and one just under a meter thick from the 1700s. It became erratic when moved one room further away but for a battery powered device I am happy with the range. To get decent reading from the LUX senor I needed to make sure it had a clear view of a window. When placed looking inward from the window side into the room reading where very low and hard to build rules against once facing a window the range increased many time over so much much more useful.

5 mensen vonden dit nuttig

Vertaal recensie in het Nederlands

Garry Spight

One of the best smart sensors

Beoordeeld in het Verenigd Koninkrijk op 4 maart 2019

Stijlnaam: Bewegingssensor.Geverifieerde aankoop

Excellent multi sensor. I brought this to connect to my Samsung smartthings hub. It works seamlessly. I brought two. One triggers the lights via motion in the kitchen to turn on when lights are below a certain lux level when motion is detected. It also controls a trv on the rad to turn off the rad if it's too hot.

The second I use upstairs with a similar logic, but I leave put the lux level as I want the lights to always come on whatever the light level is

3 mensen vonden dit nuttig

Vertaal recensie in het Nederlands

G. Clarke

Great Functionality and Compact high price point

Beoordeeld in het Verenigd Koninkrijk op 31 juli 2017

Stijlnaam: Bewegingssensor.Geverifieerde aankoop

I have a Smartthings System at home, I wanted to try a different motion sensor to the Samsung one as I also wanted something that would record light levels.

Overall I am very pleased with this motion sensor, it was easy to pair and has stayed connected no problems.

Build - Build quality is good on this, its smaller than it appears, it comes with a mount but also sits on a ledge fine. Its round design means its easy to mount in to a corner.

Positives - Easy to connect, small, lightweight, longer battery life than other bands, provides motion, Lux and temperature readings.
Negatives - Price (is fairly expensive), The light / eye reminds me of the lord of the rings and Mrs C found a little bit "freaky" its lights up on various events but you soon forget about that.

Een iemand vond dit nuttig

Vertaal recensie in het Nederlands

Multifunction motion sensor

Beoordeeld in het Verenigd Koninkrijk op 7 februari 2017

Stijlnaam: Bewegingssensor.Geverifieerde aankoop

One of the more reliable motion sensors with a light meter, temperature sensor and very subtle vibration sensor (to detect earthquakes!). I like design of the unit. The couloured cats eye not only shows you when movement is detected but also indicates the temperature based on the colour. The mount also makes it easy to adjust the focus of the movement sensor although the mount means that you'll almost certainly need to drill it into the wall. The double-sided sticky tape does not seem strong enough to hold the sensor.

Overall very good indeed, but perhaps a little too expensive.

Een iemand vond dit nuttig

Vertaal recensie in het Nederlands

5 sterren		58%
4 sterren		20%
3 sterren		9%
2 sterren		3%
1 ster		10%

Selecteer uw cookievoorkeuren

Fibaro Motionsensor, Bewegingsmelder Single met 4-voudige Sensor,...

›

Klantenrecensies

Klantenrecensies

Fibaro Motionsensor, Bewegingsmelder Single met 4-voudige Sensor, FGMS-001-ZW5, Wit, 1 Stuk

Gefilterd op

Er is een probleem opgetreden tijdens het filteren van de recensies. Probeer het later opnieuw.

Vanuit Nederland

Er is een probleem opgetreden tijdens het laden van de opmerkingen. Probeer het later opnieuw.

Er is een probleem opgetreden tijdens het laden van de opmerkingen. Probeer het later opnieuw.

Uit andere landen

Vragen? Snel antwoorden krijgen van recensenten

Selecteer uw cookievoorkeuren

Fibaro Motionsensor, Bewegingsmelder Single met 4-voudige Sensor,... › Klantenrecensies

Klantenrecensies

Fibaro Motionsensor, Bewegingsmelder Single met 4-voudige Sensor, FGMS-001-ZW5, Wit, 1 Stuk

Gefilterd op

Er is een probleem opgetreden tijdens het filteren van de recensies. Probeer het later opnieuw.

Vanuit Nederland

Er is een probleem opgetreden tijdens het laden van de opmerkingen. Probeer het later opnieuw.

Er is een probleem opgetreden tijdens het laden van de opmerkingen. Probeer het later opnieuw.

Uit andere landen

Vragen? Snel antwoorden krijgen van recensenten

Fibaro Motionsensor, Bewegingsmelder Single met 4-voudige Sensor,...

›

Klantenrecensies